How much does an aluminium ramp cost in Australia?

Are you looking for an aluminium ramp in Australia? If so, then you are likely interested in finding out what the average prices are, so that you can secure yourself a good deal. The trouble is, it all depends on the type of ramp that you are looking for, and what its purpose is going to be. 

For example, an aluminium wheelchair ramp is quite different to an aluminium loading ramp used for loading and unloading construction equipment on a trailer. As such, we are going to cover a few different types of the aluminium ramps, to cover all bases and aim to give a more comprehensive view. Let’s get stuck in!

How much does an aluminium wheelchair ramp cost in Australia?

So, how much does an aluminium wheel chair ramp cost in Australia? If you are looking for an aluminium wheelchair ramp in Australia, the average cost comes in at between $100 and $135 per square foot installed. 

The slope to size ratio is 1:12 to meet most accessibility standards. This means that for each 1-inch of rising, 12-inch (1 foot) of the ramp is required. 

For example: a 12-inch slope will require a ramp that is 12-feet in length. 

As for width, the minimum inside width between opposing handrails must be at least 36-inches wide, meaning that the ramp itself must be at least 42-inches wide (3.5 feet) = 42 square feet. 

Thus, a 42 square feet aluminium wheelchair ramp could end up costing around $5,670.

That said, there are wheelchair ramps available for less, and they certainly go way beyond that figure in terms of cost—particularly if they are custom made. 

How much does an aluminium loading ramp cost in Australia? (for construction equipment)

So, how much do aluminium loading ramps cost in Australia? Specifically, loading ramps intended for construction equipment and heavy machinery? Again, this is a very broad question and is impacted by such a wide variety of different factors. In honesty, you could pay anywhere between $2,000 and $20,000 (and beyond) for aluminium loading ramps in Australia. As such, it will be easier to discuss the various factors that can influence cost instead. You should also bear in mind that if you buy used, you can often go lower than $2,000. 

  • Used/new: Naturally, you can always save a bit of money if you decide to buy a used product. However, when it comes to loading heavy specialist equipment, if you do decide to buy a used loading ramp, make sure that you are able to test its structural integrity before parting with any money. Often, it is worth paying the extra in order to secure yourself brand-new aluminium ramps
  • Pre-made/custom made: In certain cases, a pre-made ramp might meet your specifications exactly. However, if you need a specially made custom aluminium ramp that is designed specifically for you and your requirements, then you may end up having to pay more money. 
  • Brand/manufacturer: Some manufacturers charge more than others. Be certain to shop around a bit and find the perfect balance between quality of craftsmanship and cost. You don’t want to skimp and end up with an inferior product, particularly when it comes to the loading and unloading of heavy specialist construction equipment 
  • Function: Do you need a ramp that attaches to a flatbed or pickup truck? Or are you using your loading ramp to load and unload equipment elsewhere? The function of the loading ramp may influence the cost. 
  • Size: The bigger the aluminium loading ramp, the higher the cost will invariably be
  • Extras: Are there any other specific requirements that you have for your loading ramp? (e.g., loading straps, hooks etc.)

How much does an aluminium loading ramp cost in Australia? (for ATVs)

How much do aluminium loading ramps for ATVs cost in Australia? Again, this depends on a wide variety of different factors. As such, ATV aluminium loading ramps can start at as little as $300, and go all the way up to $10,000 and beyond. If you are buying poor quality, used ramp that has been around the block, then you can certainly save some money here. As for a specialist, custom-made loading ramp, you could be looking at the higher end of the spectrum. 

What other things should you consider when buying an aluminium loading ramp? 

When it comes to buying an aluminium loading ramp, there’s much more to think about beyond the price. Here’s a list of the key factors that you should consider before you go ahead and rush into making any purchases:

  • Your load height (this is the height from the ground to where the ramp will ultimately rest)
  • The maximum capacity that you will be loading (think of this if you may purchase new equipment in the future)
  • Does your loading equipment have rubber or steel tracks? 
  • What is your wheelbase?
  • What connection type will you need?
  • What is the track width? (where applicable) 
  • How much ground clearance is there – of the vehicle you are loading?
  • How much do the loading ramps weigh? 
  • Are they new or used? (if used, what condition?) 

Conclusion 

Again, the average cost of an aluminium ramp in Australia is a difficult thing to land on, given how many different factors there are that can influence the overall cost. Your best bet is to take your time and research the specific type of ramp that you need. You should also be very clear on your expectations and requirements and settle for nothing less. Something as seemingly minor as overlooking one detail can end up in disaster. If your loading ramps are not designed to handle a certain amount of weight, then you will be putting yourself and your property at risk of damage and injury. As such, it’s always worth consulting the specialists if you are unsure, such as SureWeld in Australia. 

We hope that you have found this article helpful. Remember, the figures given are not to be taken as gospel, only to give you a rough approximation of what you can expect.

More Articles for You

What is garden levelling? What do I need for garden levelling? Should I do it myself or should I hire a professional?

What is garden levelling? What do I need for garden levelling? Should I do it myself or should I hire a professional? Click here for more

Construction Site Safety: A Comprehensive Guide [2024]

Safety protocols and best practices leads to more productive and secure job sites. Here are 9 construction site safety tips to consider.

Dog training 101: How do you train your dog yourself?

How do you train your dog yourself? What is the hardest dog command? Which dog breed is the best to train? Click here for more

Should you paint ceilings or walls first? Can you just paint over old paint? How many coats of paint should you put on a ceiling and walls?

Most people assume that painting your walls and ceilings at home is an easy job – but when it comes …

How do you repair damaged leather upholstery? Is it worth repairing a leather couch? What is the life expectancy of a leather couch?

Getting a leather couch is about more than just having a cool piece of furniture; it’s also about making a …

What Happens When You Mix Bleach and Vinegar? What to Do If Bleach and Vinegar Mix Accidentally?

Cleaning is a routine task in every household, and many of us reach for an assortment of cleaning agents to …